Surface Preparation

Allow new concrete/ plaster surface to mature. Ensure the surface is clean, dry, free from all new particles, dust, dirt, grease, wax etc. before application remove all loose or poorly adhering materials by rubbing down using a suitable abrasive paper and thereafter wipe – off and make It free drom oil /grease and other contaminants .suitable remedial measure should be taken before painting in case of water seepage / leakage problems. Clean fungus affected areas thoroughly and use suitable surface treatment chemicals. Proper surface preparation is a must to get the desired finish.

Priming

Prime surface with a coat of Prime Gold Cement Primer dry overnight smoothen the surface by using P/G ready mix wall filler to fill cracks and dents. Allow drying for 4-6 hours .sand the surface with emery paper 180. Wipe of loose particles. Apply another coat of primer. Allow drying for 4-6 hours sanding the surface with emery paper 380 and wipe clean.

Finishing

Prime Gold Interior Emulsion can be applied by brush and roller. Apply 2-3 coat of paint at an interval of 3-4 hours.

Thinning

Add about 600-650 ml. of clean water to 1 liter of paint to get application consistency.